200x axle problems

[tri-z_250R]

do any of you know how to get the rear axle out of the swing arm. i dont no if it matters but its an '83. i just cant ifigure it out :wondering

[EZ in NZ]

Take the two locking nuts off the disc side. Unbolt the disc from the mount and remove. Gentle tap the disc mount off the spline. Then tap the axle from the disc side and remove from the sprocket side.

Depending on how long it's been in there, it might be tight!

I take the sprocket off too. Basically strip the axle right down to minimum so it's easier to handle.

[jmack3986]

also leave the bolt on when taping axle you dont want to mushroom axle.