erics_250sx
07-26-2005, 01:09 AM
I saw someone with a 250SX tonight where rust had attacked the tank, coming from the inside out, so I got the bright idea to POR mine, with their POR-15 package here (http://www.por15.com/product.asp?productid=306) --
-- so, I cleaned up the tank on my SX and noticed the petcock plastic sheath is somehow pressed in to the tank -- WTF -- !! I need to remove this strainer-shealth before the POR treatment, or the strainer will get clogged with the POR gunk --
Is there an easy way to remove this strainer-sheath so I'll just have a hole there, and then a methond to re-install this pressed piece?
Other tank ideas that don't involve a goofy-looking plastic aftermarket tank??
Thanks!
eric
-- so, I cleaned up the tank on my SX and noticed the petcock plastic sheath is somehow pressed in to the tank -- WTF -- !! I need to remove this strainer-shealth before the POR treatment, or the strainer will get clogged with the POR gunk --
Is there an easy way to remove this strainer-sheath so I'll just have a hole there, and then a methond to re-install this pressed piece?
Other tank ideas that don't involve a goofy-looking plastic aftermarket tank??
Thanks!
eric