PDA

View Full Version : Tri-Z - Banshee Parts Swap



Yamahauler
07-05-2005, 07:09 PM
Will the clutch and friction plates and springs off a banshee or any other quad fit on a Tri-Z?

I just got OEM plates and springs for the Tri-Z priced out...

7 Friction Plates --> $160.65

6 Clutch Plates --> $89.70

6 Springs --> $23.70

Total --> $274.05

Thats way to much. If the Banshee or some other quads plates would fit, I would imagine they would be a lot cheaper. Has anyone tried this?

mike from long island
07-05-2005, 07:34 PM
i dont know if the banshee will fit but why not try and after market company??? i bought mine from DK for around $80 bucks for the clutches and springs. my plates were ok i havent had a proiblme yet. good luck

TimSr
07-05-2005, 07:41 PM
Ordering OEM parts under another OEM model will not differ in cost because they use the same Yamaha part number. The only thing that interchanges is a couple of dirt bikes, dont remember which ones but I was thinking it was a WR model. BIkebandit has OEM stuff for less than half the dollar amounts you mentrioned. Dennis Kirk sells YTZ250 fiber kits. EBC fibers cost $65.00, and spings are $10.00. The Vesrah kit is $91.00. Metal plates last a long time and unless you know they are bad I would just keep them. Im not thrilled about aftermarket clutches, but TriZ clutches last a very long time and youd probably be fine. I wouldnt use either EBC or Vesrah in a 250R clutch eater. Vesrah used to have springs, but I see they are no longer listed.

Yamahauler
07-05-2005, 07:53 PM
My metal plates are warped more than spec. My clutch is dragging when you put it in first and try to push it forward, I think that because the plates are warped, this is why it drags.

TRIZTUNES
07-05-2005, 07:55 PM
HEY!!


here are the dirt bike clutch kits that will enterchange with the tri-z.

yz 250 82-87: yz 490 82-90 :wr 500 90-93


note: only clutch fibers:steel plates:springs :not the clutch basket on the yz 490 and wr 500 will not work.

hpoe this helps you!!



TRIZTUNES!!!!!!!!

Yamahauler
07-05-2005, 08:07 PM
Those all have the same part numbers, so it wont really matter. Thanks anyway.

Im going to check Royal Distrubiting and Bikebandit

MTS
07-05-2005, 08:51 PM
I can see if i can get you a deal on them from work, and shipping would be mininal.....i get 5% off or more on everythin...:)

Yamahauler
07-05-2005, 09:11 PM
I can see if i can get you a deal on them from work, and shipping would be mininal.....i get 5% off or more on everythin...:)
I PM'd you