ATC 110 rear sprocket. Get it off?

[dairy king]

How in the world do I get the rear sprocket off of an ATC 110? I got all the bolts out, but I can't get the thing that holds the sprocket on. I can't get that thing to budge for the life of me. :wondering :wondering :wondering

[dairy king]

Oh come on. Someone? If I ask nicely?

[ric]

Yep
I have mine in pieces right now, pretty sure you have to pull the axle out 'cos the flange that it bolts to is staked onto the axle. Cant get mine apart at the moment as the axle is siezed onto the bearings,
Doesn't look like the axle is coming out anytime soon so you might be in trouble if yours is anything like mine!!
Sorry to be the bearer of bad news

[jenndnn3]

Give me 2 weeks, My 110 bearings are due, I put them up on the priorty and get picts... LOL watched it be seized...

[ric]

jenndnn3
Try this now, drill a small hole in the top of the bearing carrier and squirt some wd40 into the housing, let it soak for the two weeks and with luck the axle will come out, finally tap the hole to take a 6mm grease fitting and occasionally pump some grease in there.

[canadiandevil2]

if you are just trying to get the sprocket off you have to take the bolts off and there is a big C-clip on the outside of the sprocket that you can take off with 2 screwdrivers

[dairy king]

But there are two large nuts on the right side of the axle. Are these reverse threads? I can't budge them for anything.