View Full Version : 185s to 200x project
jsimonh
06-09-2005, 09:20 AM
I'm currently bidding on a head and cylinder off of a 200x :D . My question is will the top part and the rest of my 185s bolt right up? All I need is the head and cylinder to convert the motor to the 200x right?
Also will it gain a noticable amount of power? :naughty:
Thanks.
Maine_Triker
06-09-2005, 09:32 AM
The 200 and 185 motors are about the same right? So it should bolt up fine. There will not be much of a power increase, I'm not sure on the numbers but it wil not be much.
It will bolt up but you wont notice any power gains, its like 13 cc's more
jsimonh
06-09-2005, 11:02 AM
I just got an outbid notice and after reading ya'lls replies I'll just let it go.
Thanks for your help.
83185s
06-09-2005, 01:21 PM
uhm if you put the complete top end..with the cam also and buy a carb you will notice alot of increase...200x carb and cam only and youll notice an increase..but you have to get it for the 83-85 200x's the 86-87 wont fit
jsimonh
06-10-2005, 11:29 AM
The thought process I had was that the 185s is smoking pretty bad :eek: and I could buy the 200 one, get it ready to go, and exchange it out without ever putting the 3wheeler on to much down time :D . But I decided to run it all summer and tear it apart this winter and see what I could do to improve EVERYTHING! :naughty: :w00t:
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.