pics of 350x suspension on 200x

[85200xer]

I finally got a digital camera!! and I got some pics too!!
here it is :twisted:

[85200xer]

one more :shock:

[Muddy200x]

Looking good. :-D
Did you cut the stering stops off of the 350x triple tree???
I cut the stering stop bracket off of the frame and welded a little nub in its place.

like this
http://members.aol.com/_ht_a/muddy200x/images/dscf0599.jpg

[Da_Catt]

How is the suspension. Is the bike taller now? I put the 350x front and rear shock on my 85 200x. I still used the 200x swing arm. It looks like u used the 350x one. when i put my 350x shock on i made it so it has more travel, but when bottomed out it was the same height. so my bike is a little higher than stock. here are my pictures. the last 2 are of the 350x shock in my 200x. but i am sure you can figure that out. http://photos.yahoo.com/dacatt86

[85200xer]

yes I cut the stops off of the 350x's triple tree. then I drilled a hole directally in the center of the bottom triple tree and put a bolt in it, but I rounded the hex part of the bolt off first. it works awsome. I did use the whole swingarm off of the 350x :twisted: it sits about 1 inch higher. I came across 1 problem using the whole swinger, it is the shock, it hits the airbox when you jump hard :rolleyes: oh whell I will just have to figure something else out or just live with it.

[Mudder F er]

Can you put the 350X shock on the 200X swingarm, and if you could do you need to make any modifications? i'm wondering because i would like to raise my 200X up a bit to make it look a bit meaner. Thanks

[hrc200x]

Why do you have the forks clamped up so high? Wouldn't that make the dust seals bottom out on the bottom of your lower tripple clamp?

[good S**T]

that 200x looks mint. the exhaust is nice
any idea of the top speed then

[85200xer]

The reason for the forks sticking up so high is that the thing would sit level.
otherwise the front would sit higher looking pretty stupid :x I need to change where the shock mounts to the swinger so that I can move the forks back down and raise the stance of the bike up a bit. no the dust seals do not hit on the bottom of the triple tree. top speed is 50 to 55 with a 12 tooth front and a 40 rear.

[Muddy200x]

I put an 4"extended swingarm on mine and im still using the 200x shock.
It leveled it right out,and the ride is sweet.

Heres a animated pic of the trike before and after the changes .
Notice: The level that it sits is the same but the height has changed.

http://members.aol.com/_ht_a/muddy200x/images/gif1f5.gif