To all that have 22X11X8 front tires

[Huffa]

Would this 22X9X8 work? It is considered a rear tire but it might work decent for a front?

I can't recall ever seeing this size. Make sure you click on to enlarge.

We could now have a narrower tire with out changing the rim or must you still get a narrower rim too? Maybe the stock rim would "bow" it out too much but 2" isn't that extreme, is it?

Cool that it is a run-flat. You could finish out the day then!

http://www.retromotorsports.com/catalog/product_info.php/cPath/46_48_225/products_id/1705

[350x'inNY]

I don't think it would work on the OEM rim..... 2 inches is an inch on each side if you think of it that way... I think the bead would pull away from the rim.

Bruce

[Tri-ZNate]

Maybe if you ran a low enough air pressure maybe the tire would be able to spread itself out better and reach each side.

[Huffa]

Dunlop KT 537 22X10x8

http://www.motorcycle-superstore.com/photos/OG/g4715.jpg

I'll bet that would work.