can any one help me out here?

[vartiak15]

anyone have an extra dowl pin for the cam on an 85 200x? if * got an extra can * sent it my way asap? i need one quick and dont no where to get one.

[chris200x]

I might have what you need. but I'm not sure what your talkin about. Can you point it out better on a schematic from bikebandit or something like that.

[Howdy]

If your talking about the one for the CDI advancer then just make one out of a nail. I'm thinking it's the same diameter as either a 7P or 8P nail.

If your talking about the one on cam bearing you can make one out of a small bolt ( #10 or #12. A piece of nail 10P or 12P should work also.

I have made about 5-6 of them and never had the first bit of trouble.
Howdy

[vartiak15]

ints the one that goes in the front of the cam. out side the cam sprcket. its like in the shaft and the spot where the sprocket goes. ya ill just use a nail for now. thanks. chris if * got one send it to

Jim Vartiak
35 chippewa ct
oswego IL, 60543

[Lomax]

If i am not mistaken the cam in an 85 200X is the same as a 185s/200s. If so then I prolly have a dozen cams that I would let go RIGHT. PM me for Details