tires for tri-z 86

[tri-z tex]

what size of tires are some of you ppl running on your tri-z`s or act`s i got 20-11-9 on mine should i go 18 or 19 would this give me better bottem end and tire spin

[BIGCRIP28]

most people run 18s, 20s, or 22s
all depends on what kind of riding you do and what type of gearing you want.

[OldSchoolin86]

My all time favorite combo on any sport machine is 20x11-10 turf tammers. It's a little too stiff for most but I love the feel and handle of them.
http://miltechsolutions.tripod.com/offroad/3ww/ztire.gif

[Blown 331]

My 85 250R came with 18 inch turf tamers on back. The were mounted on 8" gold rims so it still matched the front. I really like them but I took them off because they geared me down too low. I put the stock tires and rims back on. For some reason I like stock tires. Dennis sells stock replacement tires for my 450R and my 250R. When I buy tires stock ones are probably going on. I like 20's though. If I had a 350X it would either get stock 450R or 400EX tires. I'm not sure what size came on a TRI-Z.
I don't care for razors. They handle horribly on pavement, especially riding a wheelie they pull you all over the place.

[Power_Ram100]

Im runnig a stock front tire with 22X11-8 Mxxis All Trax rear tires. They work pretty good for a all around trail tire. I wanted someting a little more aggresive than turf tamers.

[Kintore]

My all time favorite combo on any sport machine is 20x11-10 turf tammers. It's a little too stiff for most but I love the feel and handle of them.
http://miltechsolutions.tripod.com/offroad/3ww/ztire.gif



That exactly, my buddy has a 400ex and he has them on there. I loved it, that is my definetly my tire of choice when I get the money in a few weeks for new rears.

[tri-z tex]

with more of a gripper tire does it make it harder for yous to do donuts for some reason sometimes i get them really good and then sometimes i can`t even get in to one would this be due to air pressure in my back tires cause i didn`t have to much air pressure before and it worked great now that i filled them up its a little harder to do them

[tri-z tex]

also i got 13 44 gearing what should i change my gearing to so i could have better bottem end / better tire spin

[BIGCRIP28]

for more bottom end get smaller in the front and larger in the rear sprocket.
vice versa for more top end.