110 top end rebuild question

[BIGCRIP28]

on a 82 110 i need to know something. when you take the head off what kind of seals are in between the head and top of the cylinder. i seen one diagram that showed only one little rubber thing around one of those pins. I think that is the one that the oil goes through to get to the head. i know there is the copper head gasket too. is there supposed to be an oring on each stud?

heres one diagram, theres a couple ones of the whole gasket kits but for some reason they wont load on my computer.

http://houseofmotorcycles.bikebandit.com/partsbandit/showschematic~dept_id~168773.asp

[BIGCRIP28]

http://houseofmotorcycles.bikebandit.com/partsbandit/OEM~submit_from_stage~4~mp_id~~mscssid~NGBKFAKKBXU R9P78F8BLF71MN81C83C9~schem_dept_id~168816~section _dept_id~1~section_dept_name~OEM+%28Stock%29+Parts ~dept_type_id~2~model_dept_year~1982~model_dept_mf r~Honda~model_dept_id~168579~model_dept_name~ATC11 0.asp

can somebody get the gasket kit A and put it on here.

[coolatc]

I just finished assembling a 1983 top end and the only gaslets I used were the oil seal stud gasket and the copper head gasket. To my knowledge, there are no o-rings that go around the studs. It's been running for several days now, and no leaks.

[BIGCRIP28]

alright, ill be taking it down soon and trying it again.