PDA

View Full Version : help please!!!!!!!!!!



bigred2004
04-30-2005, 11:48 PM
Ok I am trying to get my 1984 Honda ATC200es Big Red running. So here is the story... I first got it and it didnt have any spark at all, so I replaced the stator. It got a spark after that just fine. It ran for about one day or so, then no spark anymore. So, I replaced the coil. It worked again for about one day or so. So I replaced the coil again. Now it sparks once or twice right when I crank it, but not enough to keep it running. I have put several new plugs in it, which made no difference. What could my problem be??? I have no clue where to go from here. Thanks in advance for any help... :D

Macs
04-30-2005, 11:51 PM
i have had similiar problems before. you have a short somewhere. the hard part is finding it. on my 200m i would burn up coils and stators like crazy.

TrikerR
05-01-2005, 12:37 AM
have you gone right through the whole wiring harness looking for damaged wires.

erectordale
05-01-2005, 12:40 AM
I use a continutity tester to find those broke wires when i have those kind of problems