PDA

View Full Version : Squeeling head



dooner17
04-28-2005, 06:58 AM
The head on my klt160 is squeeling. I took the cam chain cover off and there was plenty of oil in the head. Is there a berring on the cam that could be bad?

dooner17
04-28-2005, 09:10 PM
Anyone Please, I have no idea

Mobular
04-29-2005, 11:45 AM
A leaking head gasket can cause a squeal too.

MTS
04-29-2005, 12:34 PM
you cam chain could be too tight casing it to make a whuuuring kinda noise when it is reved up......you could also have some crap stuck in your cam journals or something too..

dooner17
05-01-2005, 08:28 AM
ok, ill losen the chain, and the head gasket isnt leaking. And it does it at idle and everything, Ill have to take the valve cover off

ATCwithdrawals
05-01-2005, 10:16 AM
Sounds like cam/cambearing. I had one do the same thing. I had to get a new cam, and a used head. $$$$

honda110
05-01-2005, 10:59 AM
it could be your head gasket. my 110 head squeeled until i changed the head gasket.

dooner17
05-01-2005, 12:58 PM
ok nothing on here sounds like a small job, this is my project bike that I paid 75$ for. I replaced the cam chain about a month ago. Is there no way to just replace the cam berrings.?

MTS
05-01-2005, 03:35 PM
OH! i just thought of this........make sure the cam is pushed ALL the way into the head, or it could rub on the plate/cover infront of it if there are marks on the back of the plate/cover then you know its not far enough in.

dooner17
05-01-2005, 04:33 PM
ok what playte do * man though, the cam chain one

MTS
05-01-2005, 04:48 PM
not sure on this specific bike but, do you know how to get to your cam? in the head there ther should be like a cover that covers the end of the cam with like an oil seal that screws into the head over the cam......that plate...kinda hard to explain

dooner17
05-01-2005, 05:37 PM
ok ill check it out thanks