Aluminum Radiator Shrouds

[Power_Ram100]

I saw someone else here had made aluminum radiator shrouds for their tri z. I dont have radiator shrouds and had some diamond plate lying around I thought I would try making some shrouds. I think they turned out pretty good. What do you guys think?

[Power_Ram100]

some more pictures

[Maine_Triker]

Bad Arse is how they look :naughty:

[Dammit!]

I think it's twgranger that first did that. Very cool.

[twgranger]

Nope it wasn't me. It was derick adams that did them shrouds. I put a aluminum mesh behind my factory radiator shrouds.

http://img.photobucket.com/albums/v618/twgranger/016_NR.jpg

[03 ORANGE SHEE]

those shrouds look trick! very nice!

[CHAINSAW]

what would it take to get a pair made for myself by chance? That would look killer on the DragZter

[Derrick Adams]

Saw, I can hook you up! I still have the pattern from my originals and more Diamond plate. PM me.

[Troll 2]

Those look very trick! I made a set for the 84'R project from a old irrigation pipe....lol

[toyota200x]

Those look very trick! I made a set for the 84'R project from a old irrigation pipe....lol

I have not seen that done on a R. Rad.

[MTS]

Those look very trick! I made a set for the 84'R project from a old irrigation pipe....lol
irragation pipe works good eh? i use it all the time for little brackets n odds n ends...good stuff :beer

[Troll 2]

Ha, thanks. It was just laying there in the junk pile screaming use me. Once it got polished I wished it was a better piece. Oh well its alot of fun..................... :beer

[350xsx]

i made a pair for my 350X last night, the first one took me like an hour to get it all right, and its a lot different then all of yours, the 2nd one only took me like half that time....I cant find my digital camera tho...., i need somethin to reinforce them tho,im gunna use some JB weld and put a few more sheets in the inside i guess so they wont bend....
i beat it out of metal with a rubber hammer, and a hammer that had a square end, and a ball peen hammer for the tight stuff, and i used the vice to hit it on, and a sheet of 1/2" steel thats bolted to the top of the smaller workbench.... they need to be painted i guess, its not really somethin you can polish :( or a couple coats of clear, or put the sheets of sticker stuff on it..... :confused:

[350xsx]

i just took some pics, forgot close ups, ill post them tonite, im waitin for the pics to upload to the site that can host them for me, ill edit and put the pics in when they finally do upload :rolleyes: slow computer