Metal shavings on flywheel

[mick]

i have started to fix up an '85 200x motor. the stator cover was cracked so i planned to replace it. when i took off the old one i found tiny metal shavings stuck to the fly wheel. is this normal? is this a sign of an internal problem? I would hate for those little buggers to cause irregular wear to other parts? I appreciate tips or opinions, thanks.

[YTZ250N]

Because the flywheel has magnets all The metal in there gets stuck to it. It probably wouldnt hurt to pull the flywheel and check the seal/bearing.

[speed20]

I had this problem.....on the stator and in the oil pump....turned out to be the thrust washers beside the rod....NOT GOOD....luckily it didnt throw a rod....but it could also be a gear, something rubbing on the case(s).... i would take it apart....Id rather be safe than sorry!!!