Maxima castor 927

[wanta86r]

Anyone used this stuff? I sent my 86r cylinder and head to ESR to have it bored, ported, and head rechambered. They recommend i run this oil at 32:1. Anyone with experiences reply

[crackshot]

Used to run regular degummed castor for years.
I really liked castor compared to normal 2 stroke oil.

[RacerRichie]

Yup and it smells like bbq chicken.
Worked good for me no fouls. I don't use it anymore.

[86250RZ]

Thats the only 2 stroke oil I use.... Almost everyone I know that owns a 2 stroke uses it. I also use the 32:1 ratio.

[YAMAHA_Jim]

I've been using it since the early 90's. Man,it was cheap back then,lol. I mix my gas/oil at 40:1 and use it in my Blasters and Tri-Z's without any problems.I have never fouled any plugs with that ratio.I would think any brand 2 stroke oil is good for a new motor as long as its mixed right,and the proper break in procedures are followed. haha break in procedures,,,,that topic usually gets alot of replies.
Anyways,,,Try the Castor 927, its good stuff!

[Tri-Z Pilot]

Yeah, I use the 927 and benol, I used to hate that smell, nut now I cant live without it.

[Billy Golightly]

I ran it for a little while before I started using Blue Marble. It was an ok oil, you sure could smell it. I can tell you which bike is burning it just from the smell haha.

[OldSchoolin86]

I used to run a full castor but I found your castor blends to be better. My favorite is Super Techniplate from Klots.