200s gears?

[Mudder F er]

Thanks to the help from this forum I got my trike going :beer , but its not perfect. The gears are not catching right. It seems like they take a little while to hit, and the torque is low. Its not the sprocket or chain I am using the standard and can bareley pop it up on a wheelie, as compared to my other engine (which was the same). What can it be, can I of not set the valves right?
And how can I fix the gears. Someone told me about a screw on the side you turn and it will adjust it, is this true? Thanks

[200xer]

Sounds like the clutch is not adjusted right. That screw on the side, loosen up the nut on it slightly. Turn it in until no resistance is felt. (You may not feel any resistance at all until it bottoms out, don't tighten it down though) Then, turn it out until resistance is felt. Once you find that spot, screw it in 1/8 to 1/4 turn and lock the nut back down. This should adjust the clutch correctly.