86 tri - z

[tri-z tex]

i need help with my clutch when i hold in the clutch i let it out and about half inch before fully let go it engages and disengages when i pull it half inch has anyone else had this problem

[twgranger]

Has it been replaced recently?

[tri-z tex]

nope not to what i know

[twgranger]

It might need replacing, but im not an expert on cluthes either.

[TimSr]

i need help with my clutch when i hold in the clutch i let it out and about half inch before fully let go it engages and disengages when i pull it half inch has anyone else had this problem

Im having trouble understand what you are saying. A few periods would help. From what I am reading, you let it out about half way and it starts to grab, and you pull it in half way and it starts to release, and if thats the case, I dont understand what the problem is.

[tri-z tex]

yah when i`m letting out the clutch most of it is play until about a half inch then it engages but it fully engages its got full power its not semi engaged at all
should i be concerned

[TRI Z Racer]

If its engaging and disengaging in the same spot, about a half inch before fully letting out the lever, then it sounds like its working fine. If you want it to engage when the lever is pulled in farther, closer to the bars, you can loosen the adjustment screw on the perch. Yours sounds like how mine is set up. Hope that helps.

[tri-z tex]

thanks for all the help