200s wheel bolt pattern matches?

[mx600]

Looking at new rear tires, and also wheel packages. Just a quick look showed decent package pricing for 250Rs, but nothing for a 200s. Will a 250R rim fit a 200s? Anyone know what other wheels match up?

[Howdy]

Looking at new rear tires, and also wheel packages. Just a quick look showed decent package pricing for 250Rs, but nothing for a 200s. Will a 250R rim fit a 200s? Anyone know what other wheels match up?

The 250r rims are 4/110mm. The 200s rims are 4/130mm, so they won't work. How ever if you use a set of 200x, 300ex or 400ex hubs on the 200s axle your options are opened up drastically. The list of hubs above is just a short ones that fit the 200s axle splines.
I am 100% sure the 350x hubs are different and I am pretty sure 85-86 250r hubs are different.
I hope this helps.
Howdy

[chris200x]

How ever if you use a set of 200x, 300ex or 400ex hubs on the 200s axle your options are opened up drastically.

Hey MX600, Don't get any ideas! In the new Chaparral catalog I see lots of 4/130 rims. I'm not sure what size your runnin though. They have anywhere from 8x8.5-10x9. ITP and Douglas. No "kits" though. I never really did figure out that whole diminsion thing. Prices range from $40-$60. They also have a hole page of Ohtsu OEM Honda tires. What kind were you thinkin about gettin?

[Huffa]

Hey, where you getting all this $$$$$$$ ?

See, all ready you want to trick it out a bit :D

If you decide that, let me know immeaditly so I don't go painting the rims!

That would be :Bounce juice :Bounce if you did that.......a time saver for me. Look cool too.

[mx600]

I was looking at my newest Rockymountain catalog, and some of the deals are pretty good. I was mainly thinking of getting a backup set for mud and snow. The cost of mounted tires on rims is about what I'd pay for tires and then mounting at my local shop, so it's easier to just go with a full setup.

Huffa's trying to talk me into the Kenda Vipers. My Rocky catalog doesn't have those, but they have Kenda Klaws for $118 a pair, mounted. Or I was thinking of going with some cheapo knobbies, and then buying a good set of mounted mudders.

My last option was a 200x I found sitting around. Has brand new tires on it. I could swap out the hubs and wheels and be all set. If fact I'll have my mechanic get right on that!

[Huffa]

I have the book right in front of me. Where the heck do you see them for $118 on rims ?

Mounted on steel in 22X11X8 i see 129.99

Put your glasses on.

if you don't get them........Yes, I'll take the ones off the X.

[chris200x]

Funny guy!!! You could use them if Huffa didn't sell them yet. :D Gettin all these new catalogs in the mail reminds me of the old Sear's christmas catalog when I was A kid!

I like the vipers alot...They look bada$$. Personnally I like Maxxis Big Horn. Expensive but my neighbor has them on his Grizzly 600 and he can go anywhere!

[mx600]

I have the book right in front of me. Where the heck do you see them for $118 on rims ?

I dunno...I'll check when I get home. Do you have the new catalog? The one the size of a phonebook?

[Huffa]

Only bummer is the vipes are only 2 plies but i think I'm stll going to give them a shot. A few guys really dig em.

[mx600]

Mounted on steel in 22X11X8 i see 129.99

Put your glasses on.

if you don't get them........Yes, I'll take the ones off the X.

I must've been looking at the 20x11x8...are those 118?

[Huffa]

I dunno...I'll check when I get home. Do you have the new catalog? The one the size of a phonebook?

Yea, IT's GREAAAAAAAAAAAAAAT !

[Huffa]

I must've been looking at the 20x11x8...are those 118?

125.99

:wondering I don't see any 118.

[chris200x]

What size are you running on the 200s?

[Huffa]

For another few bucks you can get 160 guage douglas jobbers for $138

I wouldn't go with the 125 guage. Too thin.

Cough up the doe and go for it!

[Huffa]

What size are you running on the 200s?

22X11X8 ugly steel jobbers

Chris, you have the RM catalog too?

[chris200x]

Not yet but it shuold be on its way. I have the new DK and Chapparral catalogs. Still waitin on a few others...Ronnies is the only one I can remember though. Lots of good stuff in there. Not to get off the tire subject but I'm thinking bout gettin some new tank scoops and some handguards. i'm not sure how'd they look though. Ever smash your fingers into a tree before...It aint fun.

[Huffa]

Not yet but it shuold be on its way. I have the new DK and Chapparral catalogs. Still waitin on a few others...Ronnies is the only one I can remember though. Lots of good stuff in there. Not to get off the tire subject but I'm thinking bout gettin some new tank scoops and some handguards. i'm not sure how'd they look though. Ever smash your fingers into a tree before...It aint fun.

I like handguards. edog has them on his. Looks great!

[chris200x]

While I'm still off the topic...How did you guys make out on that new head? I need some updates.

[Huffa]

It is as good as it can get! Not on motor yet but I can't find wear anywhere.

Cam, head & all parts perfect! He got one heck of a deal. If they were my parts and I sold them to him I would of wanted more then that for sure!

30 bucks! ..........he stoled them! That seller was nuts! Now he has a trick manual compression realease too, being that it was off a TRX.

Could not be any cleaner either which saves me some work.

[chris200x]

Hey Huffa, check your E-mail my man, I need a favor.

[mx600]

Ok...I looked at the catalog last night and I guess the $118 is the actual price including shipping of 2 non-mounted Kenda Klaws.

I'm still not sure which way I want to go. I really don't have a lot of extra money to be spending on tires and rims. I think before I order anything, I'll get the frame fixed up and painted, get everything reassembled and make sure she's a good runner. Or, if I find a couple extra $$ I'll throw it in the tire fund.

[mx600]

Here's more info, thanks to Howdy, I found that the 200s hubs are 24 spline. According the White Bros. Catalog, the list below are all the same (24 spline, 4x110mm bolt pattern):

TRX300EX(93-03),
TRX400EX(99-03),
TRX300/400 2/4x4(88-03),
TRX250X(86-92),
TRX250 Big Red(86-87),
ATC250 Big Red(85),
ATC250R(82-84),
ATC200X(83-87)

Now if I can find a set of hubs for one of those, I can buy a set of rims/tires for a 250r, etc.