tri-z aftermarket extended axle and aftermarket bearing carrier???

[dmotoxrider]

i was wondering if there is a company that makes a +2 or +3 axle for the 86 tri-z 250 and i would also like to get an aftermarket bearing carrier...if anybody knows anything let me know..thanks..
chris

[twgranger]

The banshee axle works made by durablue. Not sure about the carrier.

[mike from long island]

any banshee aftermarket axle will work. i have a LSR +4 on my Z. i personally havent seen or heard of any aftermarket carrier. the banshee axle fits in the stock Z carrier no problem. also you can use stock banshee bearings for a stock Z carrier. good luck if you find an aftermarket carrier please let us all know later

[Billy Golightly]

I've got a +4 Durablue axle from a YFZ450 quad in mine, had to do a little bit of machine work and use the YFZ450 bearings in the carrier but it seems to be a good setup so far.

[03 ORANGE SHEE]

everyone is right, i tried a banshee carrier in a z swinger and the holes are off a hair, and if you drilled them out, you will have to use the banshee caliper

[dmotoxrider]

i'm gonna check into it and see what i can figure out....i just bought back my 86
tri-z i had when i was 16...i boght a cd off of ebay with the part numbers on it and i'm starting to buy stuff for it now like plastic and other things..

[Billy Golightly]

i'm gonna check into it and see what i can figure out....i just bought back my 86
tri-z i had when i was 16...i boght a cd off of ebay with the part numbers on it and i'm starting to buy stuff for it now like plastic and other things..


Cool, welcome to the forum! :welcome: I am fairly happy with the YFZ setup on mine, just have to do some lathe work on a few peices :p