200X Carb Settings

[Bigmikeyall]

I'm running a stock carb on my 85 200X along with a DG pipe and K&N air filter w/no air box. Wondering if NE1 has similar set up and what they have their main jet, pilot jet, and needle clip set at? Bike runs ok now with what I believe is a stock setting, but she feels like I can get more out of her. :confused:

[Racedude48]

If you want to lean it out put in a smaller main jet or move the needle clip down a little. But be careful cuz you could burn up your piston!

[Glenn J]

I'm running pretty much stock, except for a K&N filter in the stock air box. I upped my main jet to 110 from the stock 108. You may want to consider going higher than a 110 for your main with your mods.