PDA

View Full Version : 1982 250r to 300r


gotballs 250r 82
03-07-2005, 01:48 PM
Ok heres what i have benn lookin at. I seen some web sites that had 300r kits for a 83/84 r. Mine is a 82 the head is the same I emailed the guy he said if i had the 300r head it would work. So i want to know if i resleeve the head &port can i put the 300r kit in and will it work...P.S. it would be sweet
__________________
350x'inNY
03-07-2005, 02:24 PM
A true Hondaline 300R kit comes with a completely different jug and head. Count the bolts... 7 not 6, so you can't intermesh 300R jug with a 250R head and viseversa.

EDIT - Here's some pics of a 300R motor with the Hondaline Jug/Head
gotballs 250r 82
03-08-2005, 02:12 PM
That is awsome thanks for the pic's. At first i looked at your pic's and ialmost ***** when i seen them. About 6 months ago i payed 400 buck for some parts i got three heads one stock one dg racing head and one head with 7 studs. I did not know what it was but now i do it is the same as in your pic's this is going to be awsome thanks.
Wickedfinger
03-08-2005, 03:34 PM
The 300R kit is still available from Honda with all of the overbores too. You can get it from PSP - http://www.powersportspro.com/partsfish/v2/displayfiche.asp
pull down the menu and click on 300R kit. You might have to register and log onto Partsfish though.
350x'inNY
03-08-2005, 03:51 PM
Discontinued.... been there tried that....
ejc042
03-08-2005, 04:33 PM
350x'inNY nailed it on the head. A couple of us have been after those parts for a while. I still don't have a piston and rings for my 300R kit. The search goes on.
Wickedfinger
03-08-2005, 04:42 PM
... hmmm, they are usually pretty ok at updating their part numbers. Then again I should have known, I have been burned by them once or twice before on small parts.
gotballs 250r 82
03-09-2005, 05:48 PM
i ordered the gasket today hope i dont get burned
350x'inNY
03-09-2005, 10:14 PM
Seems like one of the gaskets is still available.... mainly cause it's basically the same as the Odyessy

Bruce
ATCWRENCH
03-09-2005, 11:34 PM
you guys might try bikebandit.com you may be able to find a piston and a set or rings of the same size
200xman
03-10-2005, 07:25 AM
Seems like one of the gaskets is still available.... mainly cause it's basically the same as the Odyessy

Bruce

Here is a comparison of the 85 odyssey head gasket and the 300R gasket. The 300 gasket is the copper one. The base gasket is still available part#12191-961-306.
trikerooster
01-08-2009, 03:16 PM
NICE.... 250R's
Gotta love good ol' Air cooled. Less parts to break.
trikerooster
01-08-2009, 03:19 PM
I'd love to take my 82 to TRIKEFEST. That would be sick.
trikerooster
01-08-2009, 03:23 PM
Three-wheels are better than four.Three-wheels are better than four.:beer
Twilight
01-08-2009, 03:29 PM
Please dont bump a 4yr old thread.... then reply to it 3 different times.