PDA

View Full Version : premix ratios



hrc85250r
02-27-2005, 03:50 PM
what is the best ratio for power and durability for the bike that is in my signature?

i have been running 20:1 forever and i know that is too rich, but the thing is i have a friend that is a semi-professionalish dirtbike racer that is sponsored by ktm and he has always ran 20:1 in his race bikes....idk, he rides ktms and i have an old 250r so its probly different...

thanks...

1984kxtTECATE
02-27-2005, 04:10 PM
32:1 is pretty standard, it is a good mix, its a little on the rich side but not nearly as much as 20:1

OldSchoolin86
02-27-2005, 04:16 PM
Depends on the oil. I used to run 20:1 with cheap-o wal-mart oil then I got into super techniplate. With Klotz super techniplate I run at 50:1 and now I have more power and my cylinders are lasting a lot longer.

hrc85250r
02-27-2005, 04:44 PM
right now all i have is pennzoil marine tcw-3 oil, im guessing its pretty crappy, but the only time that i ran supertechniplate i siezed my crank....lol...but it smells good!

1984kxtTECATE
02-27-2005, 05:50 PM
Try out HP2 its fully sysnthetic, wich has been proven to last longer than normal 2-stroke oil.

MTS
02-27-2005, 06:19 PM
it makes sense that a guywho races bikes would mix it at 20:1 becuse a 2 stroke motor makes its most power at 18:1....check out www.macdizzy.com