Banshee/tri-z swingarm swap

[asc180]

Has anyone tried to cut the front of a Banshee swingarm an weld the Tri-z front on it. Just wondering what people have tried. I am looking at modifying a extended swingarm for a Z.

[twgranger]

I heard a blaster one will work with alittle trimming were the pivot bearings go but i have not tried it myself so im not 100% sure.

[Tri-Z Pilot]

I heard a blaster one will work with alittle trimming were the pivot bearings go but i have not tried it myself so im not 100% sure.
I think it's the tri-z swingarm that works on a blaster with some modding, not sure about the blaster arm on the tri-z.

[twgranger]

I think it's the tri-z swingarm that works on a blaster with some modding, not sure about the blaster arm on the tri-z.
No it's the blaster arm on the tri-z. Ask 03orangeshee about it, he knows more than me.

[Derrick Adams]

I think the aftermarket Banshee swingers will work. You just need to cut the center out of the front tube. I don't think you would have to cut it off and weld the other on.

[asc180]

I need to look at one and get some measurements. I was wondering about cutting the center out.