200es electrical problems

[rebber4]

I have a 1984 200es and the electric start quit working. I can direct wire the starter and it works. I bypassed the ignition switch and still no start. It pull starts and runs fine but when its cold it wears me out trying to start it. I may need a wiring diagram to figure this one out. Anybody have one or know where I can get one. Please help me.

[plkmonster2]

check the fuse that goes up to the ignition key, if that's not it, check the cylenoid, they can blow when stressed

[jeswinehart]

wires

[jeswinehart]

sorry,,, i forgot to rotate it 90 degree for you.

i think there is a 10amp fuse in the starting cicut by the way i am reading it.

good luck,,, john

[Tweeked]

Here ya go, I fliped it around...


-Mike

[plkmonster2]

does any1 have one of those for a 225 dr or dx?

[rebber4]

Thanks for all the help. I did figure it out yesterday. THere is a broke wire in harness. THe green/red going to the solenoid. It was decieving cause without a load it was testing fine but as soon as the solenoid was plugged in the connection broke. I did not want to cut open the harness so I just ran a new wire. Thanks again.

[Howdy]

:clap :clap :clap :clap :clap

Hooray, another problem is solved!!
Glad to hear you found your problem.
Howdy