Aftermatket Axle for T-3

[86250RZ]

Does anyone on here have an aftermarket axle installed on a 86/87 T-3 (Dura Blue preferably). If so could you please provide a pic of the rear axle set up, I think mine may be missing something. Any help would be greatly appreciated.

[OZQUAD44]

I've got a standard axle on mine, I could send you a photo of that if it would be helpful?
Whilst we're on the subject, has anyone compared an early model Banshee axle carrier to an 86/87 T-3 carrier. The reason i say this is that i was comparing my yfz450 rear end to the tecate the other night and notice that the rear brake calipers are almost identical, apart from the park brake attachments.
I also remember reading that early banshee rear hubs had a bolt pattern similar to the Tecate.
These two facts got me thinking. would it be possible to put a banshee axle and carrier onto the tecate? Were the axle carriers based on a similar design? do they share bearings?
Does anyone out there have access to a banshee rear end and an 86/87 Tecate rear end

[OZQUAD44]

Any one out there that can answer any of the last two posts on this thread