Question about 350X Hubs

[grundlegrabber]

I'm working on a 350X project and I'm at the point where I need to find some rear hubs. I was curious if anyone out there knows if hubs from another bike will work, like 300EX or 400EX, maybe something that will get me a little more width. I tried to fit '85 250R hubs, but the 250R axle is a different diameter. :cool:

[350x'inNY]

350X Hubs have an extra spline or 2 compared to the 200X. Since everyone is saying 300EX etc huibs work on the 200X and 81-84 R's, I'd assume that they DON"T work on the 350X.

Bruce

[Howdy]

I don't know of any other machines that the hubs fit on a 350x. So I think your limited to using 350x hubs.
Howdy

[grundlegrabber]

Thanks guys. I wasn't real optimistic about it but I figured I'd see what kind of info I could get on the matter.

[BLAZERONE22]

I might have a extra set of 350x hubs for you.

[Studytime]

I don't mean to steal this this thread, but you guys are saying that 200x hubs would work on a 200s? That way I could run 200x aluminum rims and 200x rubber.

Studytime

[BLAZERONE22]

I don't mean to steal this this thread, but you guys are saying that 200x hubs would work on a 200s? That way I could run 200x aluminum rims and 200x rubber.

Studytime
Yep they will bolt right on.

[grundlegrabber]

I do need a good pair, clean with good studs and splines. If you have some you'd like to part with, email me at robmanero@comcast.net. Thanks!

[deathman53]

I gave a friend of mine 85/86 250r hubs and they worked on his 250x, with a 350x rear end.

[TimSr]

Im not sure about 85, but 86 and up TRX250R hubs fit 350X, as Im sure 86 ATC250R are the same.