suspension mod probs!!

[85200xer]

Ok I went ahead with the 350x's front suspension and had no problems puting it on the 200, but as I moved on to the rear end I found out that the shock is wayyy too long to fit properly on to my 200x, my question is to level the bike out , (the nose with the 350x's forks is alot higher than the rest of the bike). should I lenghten the swingarm?, or is there a better way to fit the 350x's rear shock on the 200x? I want to better my landings with a longer travel shock. People who have done this please help!!!

[Mobular]

Slide the forks up into the triples to lower the front end. You can also fab up a bracket to use the 200X shock on the back end.

[Da_Catt]

to make the 350x shock work you need the shock mount from the 350x. then you have to cut and drill and i did some welding to make it fit. i will see if i can find any pictures of mine.

[Da_Catt]

are you talking about the 85 200x? that is what i am talking about.

[85200xer]

yes thats what I'm talking about

[Kilborg]

I don't remember all the exact mods we did, but on the 85 200x I had built up we eventually ended up putting a 350x rear shock on it. I broke the original jumping it.