PDA

View Full Version : Will this SPEEDO kit fit a 350X?



Maine_Triker
12-10-2004, 08:42 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4510550246&ssPageName=STRK:MEWA:IT

Thanx ahead of time. :TrikesOwn

350x'inNY
12-10-2004, 09:00 PM
No.... the 350X kit mounts on the Right side fork. The speedo cable is also too short. This is one of the original tripmeter kits. It was for the non-suspeneded ATC's and mounted down the forks a bit (not on handlebars) The tire size is different too! I bought for my 82R since same tire size and same side. I sisbn't think about the cable length!! :rolleyes:

thefox
12-11-2004, 01:10 AM
OK I am trying to figure this thing out.
The speedometer/tripmeter gear mounts on the

Left for - all 200 and 185 models, 250R models
Right for - 350x, 250sx, 250es

is this right?

petesatc
12-11-2004, 07:16 AM
hi the 85/86 250r is on the right side aswell...
cables are'nt a problem...if you do a search on ebay 'honda speedometer' it will bring up loads of cables for road bikes ,trx,etc the conections on the cable are all the same you just need one the right length....