PDA

View Full Version : Need help identifying this electric starter and housing....



MO350X
12-06-2004, 01:34 PM
I've looked at a couple online microfiche's and I'm thinking Big Red or 200M?

Thanks for any help you can provide.

4cylinders
12-06-2004, 02:07 PM
hey, must be 200s, 200es is shaft drive.

Blown 331
12-06-2004, 02:24 PM
200S doesn't have a starter.

Howdy
12-06-2004, 02:48 PM
I am thinking it is a 82-84 Big Red ( leaning heavy on the 84 ). The reason I say this spave for the Hi/Lo subtranny. 200m didn't have a sub trany so it isn't on the list.
Howdy

Lomax
12-06-2004, 05:35 PM
I looked out at the ones in my salvage yard and I am leaning on the BigRed. the 200m and the bigreds both used the same starters but the case is a little different due to the hi/lo and the shaft drive. Its really hard to tell because my side cases are still connected to the motors, but it IS one of the two for sure.

jeswinehart
12-06-2004, 06:01 PM
looks like the one hanging on my 84 200es ( bigred )


john

MO350X
12-06-2004, 06:34 PM
What you see in the picture came with the "gear reduction" deal (hi/low), too.

Thanks for the input, folks! :)

I'll be posting that thing on the classified section once I shoot 12V to it and make sure the motor works.

Howdy
12-06-2004, 06:56 PM
If it only had the hi/lo it is for a 82-83 200e.
Howdy

bigredhead
12-07-2004, 12:16 PM
like howdy said above. the 84 200 es had the reverse shaft. the 83 was chain and no reverse.

Howdy
12-07-2004, 07:27 PM
Postings removed: This isn't the classified forum. If your selling something post it in Classified forum.
Thanks
Howdy

jeswinehart
12-07-2004, 07:33 PM
mo350x ,,,, i think it's safe to say you have a honda starter that is gonna fit nearly all the pre- 1985 eletric start machines.

john