wheel spacers

[atc110]

I just looked on durablue's site and it looks like they don't make wheel spacers for a ytm175. I was wondering if spacers for another bike would fit?
thanks

[Quickonstep]

mesure across the hub, in mm's and then how many studs there are, and go from there if you have 4 studs and its 100 mm across, then you got a 4/100

btw, when you mesure across, you have to go from the center of the stud, like an imaginary circle going around the centers of the studs, thats what you would mesure.

Jesse

[conig]

as far as I know all hondas use a 4/110 pattern. I used 250r spacers on my 250ees big red.

[83185s]

no conig..not all do...my 185 has stock rims and hubs are 4/130 ..look at a denniskirk catalog..theres more stuff than the site for quads and trikes..mine match up with a suzuki 4 wheeler not sure what size tho

[bigred110]

The YT175 has 3 bolt hubs, unless they've been changed.
If you're not plaining on jumping it. Somebody on ebay sells stud extenders in 3.5 and 5 inch width.

[conig]

83 185 I tried to post exactly what you typed a minute after making my post because my 70 is not 4/110 but the site administrator gave me the, you can only post one message every 30 seconds message.

[atc110]

should i just enter stud extenders in the ebay search?

[bigred110]

Here they're are. >LINK< (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=4507119654&category=43983)
Thats whats I'm plaining on doing to my YT175 when I get it running again. The only thing is, I don't if the studs are the same on a YT. So you'll need to look into that first to make sure that they'll work.
But I've also heard that a banshee hub might work to on a YT since it works on a Z.

http://i20.ebayimg.com/01/i/02/e7/6e/7a_2.JPG