What hubs fit an 81 250r axle

[200xman]

I want to know what hubs I can use to get a 4 on 110 pattern and maybe gain a little in width. I know 83-84 250r hubs work but they dont give any extra width. Will 86-87 200x hubs work?

[3tigers]

blaster hubs will work but i dont think you will gain any width from them.

[mike from long island]

well if blaster hubs fit then tri-z will fit. and if triz fit then warrior/banshee/raptor should too i dont think so though. i have a tri-z and i put warrior hubs on it. just get wheel spacers for the blaster maybe hmmmm

[TimSr]

... and none of those will give you a 4/110 bolt pattern. You need to use 250x/300ex hubs if you want to ad a couple inches of width. You can also use 200x hubs, but they use short studs and you cant use newer OEM rims without changing the studs because they newer OEM rims are too thick. 200X hubs will not widen it.

[Howdy]

... and none of those will give you a 4/110 bolt pattern. You need to use 250x/300ex hubs if you want to ad a couple inches of width. You can also use 200x hubs, but they use short studs and you cant use newer OEM rims without changing the studs because they newer OEM rims are too thick. 200X hubs will not widen it.

A slight correction: The 86-87 200x hubs are the same as the 250x / 300ex & 400ex. Those style will add a little to the width.

The 83-85 200x hubs are the ones that TimSr is refering to.

Howdy

[mywifeknowseverything]

http://www.3wheeler.org/vb/attachment.php?s=&postid=89773

How's this???