rejetting 200x

[200xkwit]

I have an 85 200x and I need to know what jets to run.

It has a cobra pipe with a wiesco piston on .20 over bore/ uni filter and moded air box lid

id like to know what jets to run. or if someone has a close set up what do you run?

also what are the stock jets? and in my manual it say the slow jet is not removable(that its pressed in) well mines removable does this mean its a different carb?

[Dammit!]

It's not nearly as simple as being able to just ask what jets you should run. Unless someone has the exact same bike as you, in every detail, and rides it in the same location as you, the jetting is very likely going to be different. The best thing to do is try to understand how it works so you can figure out exactly what you should be running.

This thread is for a 250R but the theory is the same. Good info.
http://www.3wheelerworldforums.com/showthread.php?t=26242

[clong]

Not sure what carb you got but stock on my 1983 was 109 main jet. I got a bore and 12:1 piston with a K&N, drilled airbox and full supertrapp exhasut. I stepped up to a 113 and it runs perfect. I tried 116 but it flooded easy and now with the 113 its perfect.