measurement questions

[IceDude]

I just have to ask ne ATC 250sx owners out there if they could take some measurements off of your front forks. But first of all I kneed to know if there is ne possible way to git a pair of 250 forks onto an ATC90. I need to know the length from top to bottem form side to side at the top (bolt patterns also) and at the bottem (tire sizing). If ne of u out there can give me some of those I would be very happy THANX

[smokinp]

if you dont mind me asking,what are you doing with the measurments?

[IceDude]

not at all. i am trying to get the biggest amount of power out of a 110 on a 90 frame but at the moment i can't hold on ne more because I have no suspention and it bounces so bad at these kinda speeds.

[smokinp]

Put a 200x front end on it....

[IceDude]

does the 200x have the same holes and everything

[smokinp]

the same holes as...?are you talking about the 90 that you have?

[IceDude]

yes I want to put some suspention on my 90 so that I can go faster w/o flipping

[smokinp]

go with the 200x front end,I think that you may have to cut the steering stop off to accomdate the larger 200x front end but I have seen it done before...

[IceDude]

i think I will have to consider that one. my main quest is to try and beat a bone stock 200 blaster with my 90 with many many mods.

[smokinp]

why not just buy a 200x frame(or a cheap 200x)and build it up with just a few mods and it would beat a stock blaster?parts for a 200x are easy to come by and are inexpensive...

[IceDude]

well I guess it is time to ebay it up some more. c what i can dig up and possible figuer out how to get a swing-arm and shock for some rear suspention to

[smokinp]

someone on the boards not too long ago had a bandit 110 racing frame with rear suspension on it...

[IceDude]

I really do want to try that. c I would get a 200 frame too but i can't do that at ne kind of races because then I would race in the 200x class no the 90 class ne more and I do not want to go there