PDA

View Full Version : ATC 110 Questions



smokey
10-11-2004, 08:30 AM
I need to know what year it is the vin is ATC 110-2007835
I also need to know the point gap.
It has no spark does anybody know what would cause this. I dont know much about 110's. Thanks

hondaATCman
10-11-2004, 03:31 PM
I don't know much about readin VIN numbers, but from what you gave us there are only 2 possible years it could come up with unless there is some other method, and that is '78 or '83...and since it has points, I'm gonna say it is a 1978 model. I would set the point gap correctly (I dunno what it is) and go from there.

smokey
10-11-2004, 09:51 PM
Anyone know the point gap

MTS
10-11-2004, 10:01 PM
i think the points gap is 0.003 i think..i know its small number and its a 3...im pretty sure thats what it is..:p

TrikeKid
10-11-2004, 10:08 PM
check the spec pages it should have the vin to tell you what year. it should also say somewhere on the frame what model and year it is.

smokey
10-12-2004, 08:23 AM
i think the points gap is 0.003 i think..i know its small number and its a 3...im pretty sure thats what it is..:p
Thanks

TrikeKid
i couldent find the year on the frame

jenndnn3
10-12-2004, 09:22 AM
1979 110. In 81' they went to 17 digit vin, in 80 they changed over to something not sure what, all prior years were "ATC 110 -blahblah" first model was 1979, therefore very easy to identify your 110.

Mr. Sandman
10-12-2004, 10:15 AM
I'm not exactly sure what year this bike is, but a good guess is 79 or 80 because Honda didn't make a 110 until 1979 and the 81 models and newer don't have points. Per my Clymer manual, the point gap is 0.12"-0.16". Good luck.

smokey
10-12-2004, 04:53 PM
I'm not exactly sure what year this bike is, but a good guess is 79 or 80 because Honda didn't make a 110 until 1979 and the 81 models and newer don't have points. Per my Clymer manual, the point gap is 0.12"-0.16". Good luck.

Thanks :D