Looking For Aftermarket Carb For Modified 1985 Atc 200x

[ATCLUVR]

Hoping Somebody Out There Can Help Me, I Have A 1985 Atc 200x And I Am Rebuilding The Motor With A 12:1 Compresssion Wiseco Piston, Its Bored .040 Over And I', Gonna Be Running A "web Cam" Race Cam. I Have Heard That I Need To Get More Fuel Into The Motor, But I Can't Find Anyone That Sells A Carb For This Model Anymore. Any Help Would Be Greatly Appreciated.
P.s. I Have Some Real Old Dirt Wheels And 3&4 Wheel Action Mags That Have Advertisements For 28mm And 30mm Keihin Carbs, So I Know They Existed Back Then, But I Can't Seem To Find Them To This Day.

[greenhuman]

A standard carb off a Honda XR200 is 30mm and will bolt up to your standard manifold. You will have to port your std manifold to match the carb. All XR200 carbs will work except for the RFVC models which only went for a couple of years.

[ATCLUVR]

Cool, Thanks
Do you know if anybody sells these new?

[3Razors]

I have a brand new Mikuni 28mm flatslide I'll sell ya. I can scan you a copy from the
3 wheelin magazine on the test with this carb on a 200X it also give proper jetting and tuning.

[OldSchoolin86]

That mikuni 28mm flat slid would be a sweet card for a 200x.

[ATCLUVR]

I have a brand new Mikuni 28mm flatslide I'll sell ya. I can scan you a copy from the
3 wheelin magazine on the test with this carb on a 200X it also give proper jetting and tuning.
How much do you want for it $

[ATCLUVR]

I have a brand new Mikuni 28mm flatslide I'll sell ya. I can scan you a copy from the
3 wheelin magazine on the test with this carb on a 200X it also give proper jetting and tuning.
does the carb come with a new boot, or does it bolt up to the stock manifold? Also I'd love to see that magazine article.

[3Razors]

ATCLUVR, I sent you a email. Did you receive it?

[ATCLUVR]

ATCLUVR, I sent you a email. Did you receive it?
No I didn't recieve any e-mail from you yet. its caddy80@aol.com, please send it again