Almost there

[RideRed250R]

This is wat i have been workin on for about a month

[vartiak15]

damn looking good are thoes forks/tripples polished or chromed? what all mods are done? what color plastics u got. gives us some info on this one!

[RideRed250R]

the plastics should be white still trying to track those down the mods are a answer silencer i think a answer pipe(prolly a dg) reed spacers port and polish and boyseen rad valve. the forks are polished along with triples and the shock link to the swinger and then resivor the paint is candy apple red metalic paint with gold flake. should be interesting for the first test in the dirt. bouncing off the walls for this project!
adam
i got another project R coming soon also gotta finish this one then ill be in bussiness!

[threewheelin-feelin]

nice good job

[kilabeez0]

how did u strip the paint on the forks and polish them?

[vartiak15]

sand paper or sand blaster works. i got mine done well almost need to get them a lil better(must be prefect). as for the tripples i havent tried them yet. how did u polish the tripples ridered250r?

[RideRed250R]

well first of all i have never seen painted R forks and i polished the triples with aluminum polishing compound and my dads industrial polisher i did that whole job in about 3 hours forks included. the resivor for the shock was the hardest and the link from the shock to the swinger was pretty easy.
adam

[Troll 2]

Gotta love the air-cooled R. You got alot done in a month, good job. Hey those forks and tripples turned out great. They must have been in awsome cond to clean up like that. Theres a factory clear-coat on the aluminum, plus we usually see alot of scatches and dings. I'm still working on grinding down the casting rib in the front of the lower clamp. Good luck and high wheelies.............Troll :D

[RideRed250R]

it took my dad about a hour each fork with a industrial sander to get them to shine like that and then took about 30 minutes each to start polishing and then 10 or the fine polish the triples were hard to!
thanks for the compliments iam very happy on its turn out and when i get it put back together again *WIRE PROBLEMS* i will take pics and post

[MTS]

man that thing looks slick...wish i could find a 250r around hear that i could do sumtin like that too ...man wireing problems suck..lol

[BigGreenMachine]

Love the flatblack motor, the frame looks even better though with that wicked gold flake in the red paint. My Tecate has been under construction for years but the past week I have started building, should be a roller by morning and as soon as I rebuild the bottom end I'll be done. Can't wait for tomorrow so I can push it around the driveway like a go-kart.

[RideRed250R]

I was the same way with this trike got it a roller and pushed t down tthe drive way pushed back up and did it again lol.
adam

[RideRed250R]

iam wanting white plastics for this trike i think it would be good lookin with white plastics on the other hand iam also confused on wat seat cover i want or if i should just get a stock replacement? whats trailprotrailpro guys opions and tell me all you guys have helped me out before.
thanks adam