PDA

View Full Version : 50 tooth rear sprocket for 200x!! OMG!!


kilabeez0
10-03-2004, 10:07 AM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2492505888&category=43981

That is a SERIOUS wheelie machine!!! My new stock one is only 40. I'm tempted to get it just to try it out! :Bounce
smokinp
10-03-2004, 11:58 AM
I noticed that a few days ago,I just put some 18 nich rear tires on my 200x and I noticed a huge difference.
Howdy
10-03-2004, 12:32 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2492505888&category=43981

That is a SERIOUS wheelie machine!!! My new stock one is only 40. I'm tempted to get it just to try it out! :Bounce

We have a bigger one at the shop. It is a 80 tooth. Top speed is about 23mph and you can start out in 3rd with no problem. It was set up for use in ATV pulls. I should make a clock out of it. lol
I will see about getting pictures. ;)
Howdy
kilabeez0
10-03-2004, 12:41 PM
please do, that must be HUGE!
atctim
10-03-2004, 12:44 PM
Do 200X's really have 5 bolt mounting patterns like in the picture?
kilabeez0
10-03-2004, 12:46 PM
yes they are
trikerider2oo7
10-03-2004, 01:23 PM
that would scary torque...
smokinp
10-03-2004, 07:48 PM
a rear sprocket with 80 teeth! :eek:
AirManCam
10-03-2004, 08:19 PM
Imagine that on a 350x, or 250r :shocked:
trikerider2oo7
10-03-2004, 08:27 PM
a 350x will already wheelie in all gears...you would have to take off in 4th gear lol
AirManCam
10-04-2004, 06:30 PM
a 350x will already wheelie in all gears...you would have to take off in 4th gear lol
I don't know whats done to your 350x, but mine is piped,jetted,K&N (stock gearing right now) with 20 inch tires, and I know I can't get it to come up in 6th with out pulling. 5th is hard enough to get it to come up. But 1-4 is good :p
clong
10-04-2004, 07:19 PM
So if you put a bigger sprocket on the back you get more low end holeshot pull and a smaller one gives you more top speed.

Now what about the front. Is that the opposite?
clong
10-04-2004, 07:27 PM
Found my answer on another post. Thx anyway
add to the rear or subtract from the front for more bottom end and subtractfrom rear or add to the front for more top end
Howdy
10-22-2004, 11:47 PM
As promiced before, here is our "small" sprocket. Sorry for the delay.
Howdy

http://www.bright.net/~4howdy/200xRearSprocket.jpg
MTS
10-22-2004, 11:51 PM
WOW Howdy thats Huge :D
blackwatch1989
10-22-2004, 11:55 PM
holly crap thats big
Howdy
10-22-2004, 11:58 PM
I forgot to add this comment: Can you say torque? With this sprocket your pulling ability is almost unlimited.
Howdy
azhondagrl
10-23-2004, 12:00 AM
we have a 52 tooth sprocket for the 83R, lol. haven't gotten to try it out yet. it's nowhere near an 80 tooth, but its still BIG!!
GreyhoundRugby
10-23-2004, 12:27 AM
suprised that doesnt scrape the tail light
Pistonhead
10-23-2004, 12:17 PM
That things a monster!
kilabeez0
10-23-2004, 04:01 PM
how can that thing not dig into the ground???
Lots_Of_Nothing
10-23-2004, 04:49 PM
how can that thing not dig into the ground???

because the tires on the old pullers are alot bigger then that.
kilabeez0
10-23-2004, 05:04 PM
thought so
Howdy
10-23-2004, 06:05 PM
While it looks big the sprocket is only 16 1/4 inches across. Buying chain to wrap around it can be costly!! lol

Also it is for sale $75 + shipping ( it's heavy ).
Howdy
Lots_Of_Nothing
10-23-2004, 07:45 PM
howdy,, how many links do you estimate it takes on a chain to fit that?.. its gotta be helluva lot, i mean, a stock 200x is only like 96 or so isnt it?,, or is that 250r.. ehh brain fart.. hehe, help me out people!, also, howdy, is it the same thickness as other sprockets? also, what's it made of. you should throw it on ebay, i bet some enthusiast would pay some big bucks for it.