exhaust clamp and insert

[svo58]

I got a 200es B.R. ,can you still get the clamp and the insert that holds the header pipe and muffler,mines shot and it leaks bad .Can you get them any more,or any sub. for them ,thanks.......svo58

[atcmatt]

I'd say you could still get them from Honda. Or you could probably go to the hardware and find something similar to clap it with and then use exaust cement to fix any leakage.

Matt

[smokinp]

duct tape?just kidding,can you weld it maybe?

[xd 200x]

you can get the gasket for 12.00 from honda

[YTZ250#1]

There is a gasket in between the header and muffler.You should be able to get it from honda.the clamp might be discontinued but I'm not sure.I think it is the same as the 200x and they are.I have an extra if honda can't get you one or if it is real pricey.

[svo58]

Thanks i'll check out my honda store near me and see what they have.

[83200e]

You can by the band clamps(wide ones) at any aftermarket cycle shop for about $10-$12.