PDA

View Full Version : 82 yt175 still having some problems



Savage99
09-24-2004, 07:26 PM
Well, I finally got it started and changed my leaking intake boot after doing the top end. It starts once, then I shut it down and try to start it again...no go. Pull the plug and its wet and oily. Let it sit for awhile put in a new plug and she starts again. Any ideas? Sure could use some help quick...I really would like to take it hunting with me tommorrow.

Mark.

hondatrikesrule22
09-24-2004, 07:32 PM
It is wet and oily because it is running rich. You will have to re-jet the carb. for it to run right.

Savage99
09-24-2004, 09:35 PM
Sorry for the ignorance but how do you rejet the carb?

Mark.

hondatrikesrule22
09-24-2004, 09:57 PM
Let me ask this, does it have a performance pipe or airfilter? With that being said, you take the carb off, flip it upside down and take the float bowl off. It will be a little brass thing that screws in. You swap it out for a different jet. You would have to go to a dealer to get a jet kit. Or, if you have the factory parts, put them factory parts back on and not have to re-jet.