PDA

View Full Version : Carb Help!



roofinggun
09-18-2004, 10:53 PM
Hi Fellas,

I have a machine that will not idle unless fully choked. I tore it down and cleaned it and put everything the same as it was when I took it apart as far as turns in or out, but it didn't help. It starts better, but no idle without the choke. Is there a simple answer?

200xkwit
09-19-2004, 08:10 PM
you might have an air leak in your manifold or head gasket. too check start your engine and then spray brake cleaner or wd 40 around your manifold(not the carb intake tho) and if it accelerates in revs then its leaking.

or your throttle needle is sticking/ unscrew the throttle portion of the carb and whip it down and inspect it.