few questions for the pros

[vartiak15]

ok is it a good idea to go run a cam, lightened fly wheel,and bigger carb with stock compression (the piston and stuff is brand new just stock compression)

[vartiak15]

o and a porting and polishing, well mabye port but for sure polishing.

[Wickedfinger]

It won't hurt it any .... my question is, why would you go with all of that work and not pop a higher compression piston in there?. You are looking for more power, a hi-comp piston will deliver that. I know you said you have a new stocker in there but while you have the whole thing apart, it just makes sense to spend another $85 on the piston.

[vartiak15]

the new one isnt it its still in the box.(should get manual tuesday so i can rip the motor apart) i jsut dont want anything to over heat(so thast why i am going with stock compression because i dont want to waorry about that). will i get a ton more power if i add the 10.25 or something?

[samster143]

The best, most reliable way to get more power is to increase compression or displacement.