PDA

View Full Version : Oil change in 350X and service manual



clong
08-09-2004, 04:00 PM
Hey, I just bought that 350X last weekend and I want to change the oil. I just ordered a reapair manual but it won't be here for a week. I had to order a Honda Facotry one becasue Clymer or any other companies don't make manuals for the 350X.

Could anyone tell me how much oil I put in for a periodic oil change and do I need a gasket for changing the oil filter. Anything else I should know. Thx, Chris

84250r
08-09-2004, 04:06 PM
Chris,

No you don't need a gasket for the oil filter cover. Just check the o-ring to see if it's still in good shape. AS for oil,the 350 takes 2.3 liter(24.3 US qt) after disassembly.

Xowner
08-09-2004, 04:10 PM
grrrrr what size allen head do you need? and best way to free it up i have been having to pull one of the side cases and tip it over and change it that way for the last two oil changes

84250r
08-09-2004, 04:11 PM
Xowner,

I think it's a 8mm


If your 350X still has the original tool box,it should have an allen wrench in there Chris.

clong
08-09-2004, 04:27 PM
I don't have the original tool box but you say it takes an allen wrench to take the oil cover off?

Also, how much oil for periodic changes. I notice you said 2.43 qrts after engine dissaseembly but how much oil in ounces or quarts does it take just draining it and pouring new back in. It should be a little less.

84250r
08-09-2004, 04:39 PM
Little less then 2 quarts. The allen wrench takes the oil plug off/on.

hrc200x
08-09-2004, 06:24 PM
I think thats another difference between the '85 and '86 350x, '85's use a allen wrench to take the drain bolt out, and a '86 is a regular hex bolt.