little question.

[mevaters]

Hey, The right foot peg on the z is really loose and falling off. The bolts have a little room to wiggle in there. I think that the tread where the foot pegs screw into the frame are worn down. I am just going to try a little bit larger bolt tomorrow to see if that works. If not did anyone on here have the same problem and if so How did you fix it. Is there a drill bit attachment that can make the holes a little bite bigger and make new tread? Or would you have to take this to a machine shop? Thanks in advance Rob.

[84250r]

Use a tap for a bigger hole and pick what threads you want it to be(i.e. 18,20,24,32,etc..or mm's)

[almac16]

Yeah ....... get yourself a tap and die set.........they are very handy,....I've used mine a lot !

[mevaters]

Thanks for the help. The hardware store has tap and die sets in stock, I will pick one up tomorrow.

[smokinp]

try putting some washers on it...

[bigredhead]

a nut a bolt and locktite.

or

jbweld !!!!