kick start 110

[TrikerR]

hay everyone, i have a 110 and am sick to death of pull startin it. i was just wondering if it is possible to convert it to kikc start and if it is, what are some possible donors.

[84honda 200X]

I think one of them old 110 trail bikes i think the bottom end would work? Just a guess.

[TrikeKid]

a CT110 would have it the CT90 might work too you'd just need the side cases off of the CT or if it runs swap it all in.

[hondatrikesrule22]

I hate pull-starting my 110 also. here is what you do. You get behind it,and push it as fast as you can,jump on and put in in first gear while rolling. :)

[smokinp]

why would you need a kickstarter on a 110?they are very very easy to start.

[StangLX302]

I was going to say something like that too. Maybe a good tune up and a carb rebuild is needed. Sounds like your having to pull it too many times to get it going. My 185s will start with just 1 quick pull.

[rob0781]

i put my 110 in 2nd or 3rd gear give it half throttle and start running and vroom it fires up after about 2 steps...

[TrikerR]

yea i have to push start it sometimes but its really not fun when it dies in boggy sand...i really wanna do the conversion, how would u do it if i got a ct110 cause my freinds got one that he wants to sell

[rob0781]

i think you'd have to use the whole bottom end off the ct 110

[H.M.F.I.C.]

I would also say you would have to get the whole bottom end from the ct. My 9 year old nephew wanted to ride my 110 one day and Itold him if he started it we would ride it and he did it on the first pull. If a 110 doesn't start on the first pull there is somthing wrong with it.

[BIG BAD RED]

you can pull faster than you can kick you need kick for more power and higher comp engines...like the grizzly pulstart is deathly :P

[TrikerR]

ok then so kick starts a bad idea. and what your saying is that if it dosent pull over first turn theres something wrong with it. also what can go wrong with the ignition

[BIG BAD RED]

where abouts in oz are you i mihgt be able to give you a hand wiht it....it is probly just low compression which the cheapset fix is new rings which will get u outa trouble for a while....

[TrikerR]

im in west oz
would have anything to do with the carb...should i kit it just in case.

[BIG BAD RED]

yah im a east coast guy...i dont think it would work out...lol...i doubt it would be a carb problem...find out what the stock settings for it are...you can always bring it to a shop (jsut carby) and get them to jsut go ofver it for u

[TrikerR]

i think i might just invest the money in a carb rebuild kit
where could i get some rings from

[BIG BAD RED]

any honda shop...i dont know of any good ones over there...but you need to pull your piston out so u can make sure u get the right rings..

[TrikerR]

does anyone know if maie would do black plastics for my trike

[trikerider2oo7]

i'm sure they would...but the price wouldbe terrible

[martyrsxblood]

my 110 didnt start on the first pull before because it had two bolts jumping around in the engine then a couple of weeks later the engine blew up you should get those rings and rebuild the carb i got a new engine on ebay $100 really cheap and worked fine