a few 200x questions

[jakey]

Hey guys I have a 85 200x with a uni filter and no airbox lid, I was looking at putting some new gearing on there for a little more top speed, but i still want to have a good bit of bottom end on tap for when things get sticky. Also I was wandering if rejetting it might pick up a little more performance out of it. As you can tell I am trying to take the cheap route due to money issues cause i am purchasing a vehicle. But i do have a high compression piston and pipe in the near future for my x.

I appreciate it guys

[84honda 200X]

Gearing would help drop a tooth on the front sprocket or on the back should give you more top end speed.

[smokinp]

if you want more top speed then you will need to up the number of teeth on the front sprocket or go down on the back sprocket,going down 4 teeth in the rear is equal to going up 1 tooth on the front sprocket.

[Wickedfinger]

... also, if you just took off the airbox lid and didn't rejet, all you did was lean out the mixture and rob yourself of power, you gained nothing.