Wtf!!!!!!

[BLAZERONE22]

http://images.snapfish.com/33%3B3254723232%7Ffp64%3Dot%3E2324%3D589%3D656%3DX ROQDF%3E2323583%3B%3A6854ot1lsi


Well I was under the inpression from what I've read, that 81-84 250r aircooled motors were interchangable, a straight swap, well I used a 82 bottom end in my 84 and was dropping it in tonight when I noticed the shifter shaft was tagging the frame, looks like its longer. Whats the fix for that????

[dirtface]

My thinking for years now was the same as your, their the same! Well their not. I have an '82 250r and an '83 250r, after reading your post, I went out and measured and the '82 is almost exactly an inch longer than the '83.

[82-8250R]

i think that the 81-82 swap and the 83-84 swap with each other i think.....

[Xowner]

yup the bottom ends are diffrent 81 82 and 83 84 alot of parts interchange but their not the same if u need a 83 bottom end shoot me a pm!

[Lots_Of_Nothing]

you do NOT need a whole new bottom end, just the shifter shaft. it will swap out.