PDA

View Full Version : smoking125m



hondawilly
07-14-2004, 01:57 PM
my 125m smokes tons and dies down a little bit after it ran for a awhile anyone tell me how to cure that

trikerider2oo7
07-14-2004, 03:40 PM
it may new rings, check them because they could be causing the smoke

smokey
07-14-2004, 03:49 PM
see if your head gasket is leaking

n8dizzle2003
07-14-2004, 04:01 PM
Does the smoking get worse after you ride it for a while. Say like hardly any smoke when engine is cold but after it warms up does it smoke more. My guess is probably rings. Tear it down and put new rings in it. It will be a great afternoon project! :D Have you looked at your plug after the engine stalls. If not, pulll it out and check to see if it is coated with oil.

hondawilly
07-14-2004, 07:54 PM
i dont know the smoking just quit and it pour a little bit of blue smoke if you rev it up

1FastTecate
07-15-2004, 05:21 PM
i dont know the smoking just quit and it pour a little bit of blue smoke if you rev it up

I use to have a honda 125m had the same issues. i changed the rings and every gasket i came into contact with in the repair. I suggest to do the same and it will resolve the smoke issue

threewheelin-feelin
07-15-2004, 05:42 PM
valve steam seals will cause it to smoke to if there bad

hondawilly
07-19-2004, 05:32 PM
it isnt worth fixing now it lock up it will run but will not move or rev up (sounds like you have it in a complet stop with it in high gear pinned)

rob0781
07-20-2004, 03:38 AM
sounds like ya blew the tranny...did the oil drain out?

hondawilly
07-20-2004, 04:25 PM
i was going down a road and it did that and it left a big puddle of oil then i got it going again to gety home and it locked up or whatever

hondawilly
07-23-2004, 11:16 PM
will a 110 engine fit in my 125m frame?? (just slide it in and bolt it down

hondawilly
08-20-2004, 11:57 PM
fine nobody talk to me this place is horse trailprotrailprotrailprotrailpro

martyrsxblood
08-21-2004, 12:08 AM
yeah i know what you mean when know talks to you on this sit but a 110 engine will bolt on but will lose power

hondawilly
08-21-2004, 12:12 AM
ok thankyou

martyrsxblood
08-21-2004, 12:18 AM
do you have any dowel pins for a 110 you know the locating studs that make the engine come together correctly

atcmatt
08-21-2004, 01:44 AM
fine nobody talk to me this place is horse trailprotrailprotrailprotrailpro

Horse trailprotrailprotrailprotrailpro is it mate? Well if you dont like it then **** off. We dont need no hopers like you saying that kind of rubbish on here. If this place is horse trailprotrailprotrailprotrailpro why do so many people use it???

Something wrong with you :confused:

Matt

TrikerR
08-21-2004, 03:47 AM
i agree with matt...just because no one has answered you dosent mean you have to go and chuck a hissy fit

3 weelin geezer
08-21-2004, 04:14 AM
fine nobody talk to me this place is horse trailprotrailprotrailprotrailpro

What a grouch :mad:

threewheelin-feelin
08-21-2004, 03:24 PM
Horse trailprotrailprotrailprotrailpro is it mate? Well if you dont like it then **** off. We dont need no hopers like you saying that kind of rubbish on here. If this place is horse trailprotrailprotrailprotrailpro why do so many people use it???

Something wrong with you :confused:

Matt
hahahahahahaha :Bounce :Bounce :beer :beer :TrikesOwn :TrikesOwn i agree his 125 isnt the only thing with issues

hondawilly
08-21-2004, 05:25 PM
i am not sure