View Full Version : atc 110 won't idle
flashover
07-13-2004, 10:28 PM
ok here we go,,, i have a 1980 honda atc 110 , it won't idle hot or cold unless the choke is on.
I have sprayed carb cleaner all around to find a vac leak,, but non found.
I have also ck'ed the valve adjustment,,, seem ok (not tight)
any help????
Also do u know where i can get the lifter caps????
any help wouls really help. :beer
hondatrikesrule22
07-13-2004, 10:33 PM
My 110 acts up sometimes. Heres some thing you could try...
Change your spark plug.
How fast is it idleing?
My 110 does the same thing till I clean the spark plug. I may wind up cleaning my carb. out really good....hope this helps. :)
flashover
07-13-2004, 10:53 PM
I cleaned the carb (soaked in cleaner even) but no help.
I used the old gasket and stuff ,,, i got a carb kit on order just in case...
I am a service manager for an auto repair shop so i kinda know aht to look for ,, but this has me stumped
also where can i get a cobra exaust sytem for my 110????
hondatrikesrule22
07-13-2004, 10:58 PM
You can get a cobra exhaust an www.denniskirk.com. They go for about $110.
leprogle
07-13-2004, 11:13 PM
a 110 guru told me the other day, that his 110, wouldn't idle, and he tried all kinds off things, and finally what it was, was the cdi springs, were worn out, and wasn't pulling it back together fast enough, put new springs on, and it idled like a dream
I had idling problems with my 185, and i put a new needle and seat in the carb, and it now idles the very best
good luck
4atcsandcntng
07-14-2004, 09:52 PM
try turning in the air screw all the way until it stops, then srew it out 1 1/2 to 2 turns then adjust the idle from there. one of my 70's did it all the time. the air screw was missing the spring so it always screwed out of adjustment and would barely start and never stay running on idle. it's just a suggestion but it sounds like the same thing
plkmonster2
07-14-2004, 10:47 PM
leprogle, just to clarify, are you talking about the timing advance springs? Thanks.
flashover
07-14-2004, 11:20 PM
Ok i'll tyr the cdi springs (what is cdi??)
also i'm gonna rebuild the carb , got the kit today..
Where can i get the cdi springs????
Also what type of oil should i use (Ineed to change the oil soon) :beer
rob0781
07-15-2004, 01:04 PM
my 110 won't idle either ,i'm thinking it's either the head gasket haven't seen no leaks tho or the jet needle and seat in the carb ,but now these cdi springs got me wondering never heard of that before..
leprogle
07-15-2004, 04:19 PM
I think they're the timing advance springs, they're the two little springs on that magnetic thing on the top end, I've always referred to it as the CDI, because it says CDI on the cover on my 185
rob0781
07-15-2004, 04:30 PM
yeah the cover on my 110 says cdi too i'm gonna check it out and i'll let ya know..my cdi has a bad gasket so i'll be opening it either way..
flashover
07-15-2004, 10:55 PM
still won't idle with out the choke on,,, rebuilt the carb and cked fuel delivery.
I think cdi is next,, where are they located????
Also what is the point gap for the 110????
:beer
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.