What to buy?

[mevaters]

Hey, I noticed a wobble on the rear end of the 85 tri-z, I checked and the axle had lots of movement on the left side right where the sprocket hub meets the middle of the axle and the thing(that the suspension is connected to on the axle) so It looks to me like the thing that the suspension connects to on the axle is broken. 1st question is what is that thing called? second question, is it possible to replace just that part or do I have to replace the whole axle and sprocket hub? and if I can just replace that part, how much does it cost and is it a difficult job? Thanks.

[twgranger]

could be your bearings are bad, that would make it loose.

[Wickedfinger]

... sounds to me the first "what to buy" thing is a manual.

[mevaters]

here is a picture of the part that i am having a problem with. Right where the sprocket screws into the part that i have marked out with yellow is very loose and seems as though that part is broken.

[84honda 200X]

Thats your bearing carrior and i would just replace the bearings that should fix it.