what kinda paint??????

[vartiak15]

what is the best made, for duribilty, spray paint out there? i need a gloss black for my frame and tank and dont no what brand too get. is there anything that some paints have in it then others that makes them better? o and about how many coats of primer should i do then how many of normal paint and then how many of clear?????

[DIGGER DOG]

I am by far not an expert,but when I did my 200X I used PJ1 coatings paint,
dont know if they have black? I sand blasted the frame ,then final sanded to smooth it ,I put only 1 coat of primer(If PJ1 is used definately use their primer
I didnt and had to redo because of chemical imbalance of different primer)
Then sanded the primer nice and smooth,then applied the paint,about 3 coats
let it all dry then a few coats of clear.
I am doing a 86 250SX now and used Dupli-Color 500degree ceramic engine enamel I use it on all my motors the ceramic makes the engine run a bit cooler
too this stuff looks after its dry like powder coat it dries in an hour dries to be handled in 3 hours but takes 5 days to cure it is also glossy
I just touch up sanded 250SX frame and then just painted I will have to take some pics of the SX project. so you can see how well this paint works to me anyways.